| SPFECIFICATIONS |
|
| DC-II |
|
| Inputs (1/4” TRS Phone and XLR) |
Floating Balanced; XLR: Pin 2 and TIP HI, |
| Impedance >50kΩ balanced, >25kΩ unbalanced |
| Maximum Level +24dBu, Balanced or Unbalanced |
| CMRR >40dB at 1kHz, typically >55dB |
| Sidechain Insert (1/4" TRS Phone) |
Normal: Ring = Output (send); Tip =Input (return) |
Impedance : Tip = >10kΩ (Input) Ring = 2kΩ (Output) Maximum
Level +24dBu |
| Outputs (1/4" TRS Phone and XLR) |
Floating Balanced; XLR: Pin 2 and TIP HI |
| Impedance 120Ω balanced, 60Ω unbalanced |
| Maximum Level +21dBu,>+20 dBm into 600Ω, balanced orunbalanced |
| Frequency Response 20Hz - 20kHz; +0, -0.5dB,Typical 3dB points are 0.35Hz and 110kHz, unity gain |
| Noise <-90dBu, 22Hz to 22kHz, no weighting, unity gain |
| THD+ N Typically <0.04%; Any Amount of |
| Compression Up to 40dB@1kHz |
| SMPTE IMD Typically <0.08% @ +10dBu (15dB Gain reduction) |
| Compressor |
Threshold Range -40dBu to +20dBu |
| Threshold Characteristic Selectable OverEasy or Hard Knee |
| Compression Ratio Variable; 1:1 to Infinity:1; 60dB Maximum Compression |
| Attack Time Variable program-dependent; 3ms to 340ms for 15dB gain reduction |
| Release Rate Variable program-dependent; 200dB/Sec to 3dB/Sec |
| Expander/Gate |
Threshold Range OFF to +15dBu |
| Expansion Ratio 10:1 |
| Maximum Depth >60dB |
| Attack Time <500μs (from Maximum Depth) |
| Release Time Adjustable, 30ms to 3sec (to 30dB attenuation) |
| Peak Limiter |
Threshold Range 0dBu to +20dBu |
| Gain Adjustment Range |
Variable; -20dB to +20dB |
| Interchannel Crosstalk |
<-80dB, 20Hz to 20kHz |
| Dynamic Range |
>115dB |
| Operating Voltage |
120VAC 60Hz ; 220 VAC 50/60 Hz |
| Power Consumption |
15 Watts Maximu |
| Dimensions (H x W x D) |
44mmx483mmx145mm |
| Rack Space |
1 Rack Unit (1U High) |
| Weight |
Net weight: 4.85 lb (2.2kg) |
