Power Amplifier
SPRO 1200
- ．Switching Mode Power Supply (SMPS)
- ．XLR & 1/4” - input connectors
- ．SPEAKON and Binding-Post - output connectors
- ．Selectable stereo mode, parallel mono mode and bridged mono mode
- ．Input gain selectable (0.775V, 1V and 1.44V)
- ．INPUT THRU XLR output connectors for signals easily passing through to multi-amps setups
- ．Circuit breaker
- ．Detent gain controls
- ．Built-in limiters with on/off switches per each channel
- ．Subwoofer function can select the crossover frequency from 20Hz to 200Hz
- ．SIGNAL, level at -20dB, -10dB, CLIP, PROTECT, STEREO mode, PARALLEL mode and BRIDGE mono mode LED indicators
- ．Dual 2-speed fans
OVERVIEW
The SPRO 1200 power amplifier is professionally designed for both installed sound application and portable PA. It is rugged and offer the best value at an affordable price.
The SPRO 1200 is designed with Class H topology and Switching Mode Power Supply (SMPS), therefore the weight is ultra-light. It provides selectable stereo mode, parallel mono mode and bridged mono mode in variable ways of using the unit, and it has been thoroughly tested and designed to mount into a standard 19"rack.
DESCRIPTION
The SPRO 1200 model is equipped with selectable input and output terminals that make them suitable for professional sound application: XLR and 1/4" TRS input terminals with binding post and Speakon output terminals, which accept balanced and unbalanced connections. Use these connections to connect the output signals from a mixer, a crossover or an EQ to your SPRO 1200 amplifier. And there are extra XLR output connectors for signals easily passing through to multi-amps setups. Binding post and Speakon output connections for dual channels or bridged mono channel. Setting to subwoofer will only allow frequency output at 20Hz to 200Hz to play.
Protection circuits include short circuit protection and detent gain controls. The circuit breaker is designed to protect the amplifier and your speakers in the event of an AC overload. Detent gain controls for easily repeatable settings.
Built-in limiter allows signals below a specified input power to pass unaffected while attenuating the peaks of stronger signals that exceed this input power.
Indicators clearly showed the status of the protection systems and other parameters: each channel is designed with separate PROTECT indicator indicates protection circuit activation; SIGNAL, level at -20dB, -10dB, and CLIP indicators; PARALLEL, STEREO, and BRIDGE indicators show unit's amp mode status. Continuously dual 2-speed fans efficiently prevent overheating and maintain high stability.
For more details about the UNiKA SPRO 1200, please contact UNiKA Professional Audio at +886 2 2793-3017. Also, visit the UNiKA Electronic Co., Ltd. website at www.unika.com.tw
Ventilation Frame Disassembly Diagram
SPECIFICATIONS
| SPRO 1200 | |||
|---|---|---|---|
| R.M.S. Output Power 2 Ch Driven 2ohms/4ohms/8ohms 1KHz 1% THD |
2ohms | 4ohms | 8ohms |
| 2200W | 2000W | 1200W | |
| R.M.S. Output Power Bridged Mono 4ohms/8ohms 1KHz 1% THD |
4ohms | 8ohms | |
| 5000W | 4000W | ||
| Input Sensitivity | 0.775V, 1V and 1.44V | ||
| Frequency Response (20Hz~20KHz) | ±1dB | ||
| Total Harmonic Distortion | <0.02% | ||
| Crosstalk @ 1KHz | >60dB | ||
| Damping Factor | >400 | ||
| Signal To Noise Ratio below rated power 20Hz to 20KHz, A-Weighted |
>80dB | ||
| Power Consumption @ Maximum Output Power 8ohms |
2680W 24.36A@110V |
||
| Output Circuitry | CLASS H | ||
| Cooling System | Dual 2-Speed Fans and Heatsinks | ||
| Dimensions (H×W×D) | 88 x 473 x 536mm | ||
| Weight | 16kg | ||
| Rack Space | 2U | ||